Voice Programmed Remedy Maker (Mk2A)

Instructions for Use

 

This version of the Voice Programmed Remedy Maker has no electronic circuit and consequently no batteries or beeper like other versions of this Remedy Maker.

The device is designed to make remedies from the words spoken into it, the name of a remedy plus the potency, (a Homeopathic Remedy) the name of a remedy without the potency (an Energy Remedy) or the description of an illness plus potency (an Energy Programme).

To use you should first formulate exactly which remedy is required. It can be beneficial to practise speaking the name of the remedy plus potency so that you have it clear in your mind exactly what you are going to say.

Push the Record button A., and speak the name of the remedy immediately followed by the potency into the Microphone, then release the button. If required you can then add further remedies by repeating the same process, until you have stored the entire remedy combination you require. If you prefer to input a Rate, no problem, speak your series of numbers. If you make a mistake, you will have to erase what you inputted by pressing down Erase switch C., and holding it down for aprox 3 seconds before allowing it to spring back to the off position.

When you have stored the remedy information you wish to use, you should then place the device on a table or flat surface, and place in the Remedy Well a small bottle of blank unpotentised tablets, or just a few pills, or a bottle of water, and then push Make Remedy Switch B. towards the well (Position 3) and hold it there for aprox 3 seconds, before allowing it to spring back to the center off position (Position 2)

Should you then wish to make more of the same remedy, simply place more tablets in the well, and again operate the Make Remedy Switch exactly as above. This can be repeated as many times as required, or alternatively the output lead and clip supplied can be plugged into Output Socket D. and the vibrations can then be fed to a larger receptacle, such as a metal dish, simply by clipping onto it. When you are finished with that remedy, you should then clear the internal memory, by pressing down Erase switch C., and holding it down for aprox 3 seconds before allowing it to spring back to the off position. You can now go ahead and record and make another remedy.

The device can be used to make therapeutic energy programs and these can be very useful if you don't know a suitable remedy for a problem and haven't got the time to look it up. Simply describe the symptoms into the device as clearly as you can and add a potency on the end. In emergency situations the finger of the person requiring that remedy can then be placed in the Remedy Well and the Make Remedy Switch B operated, to transfer that remedy directly into the patient.

Continuous Treatment: When the Make Remedy Switch B is placed in Position 1, vibrations are outputted continuously to the well and the output socket until you switch the device off. This can be used for transmission of vibrations to a patient who could be many miles away, in fact an unlimited distance. To use this feature make your remedy by following the directions above, then place the device flat on a table and place in the little well of the device a hair sample from the patient, or a photograph of them taken on their own. If you wish to use a �Witness� that is too large to place in the little well, you can feed the output vibrations to a metal dish using the output lead and clip provided, and place your witness in there.

Protective Energy Fields: The Continuous Treatment facility also makes it possible to create protective energy fields. There can be no denying that there are some very negative energies around, some projected by natural causes, most by very unnatural ones. If one is sensitive, this can be very distressing, and the device can be used to generate a protective field around a person. To do this, you will need to record a suitable program.

Most people like to have protective fields made of different types of light, White, Yellow, Blue, and Light Blue usually being the favourites. Record into the device: "I place a protective energy field around myself, made of ??? light, extending to a distance of ??? radius around myself (Enter type of light and distance in inches/feet/metres etc) Place your own hair sample in the well, and switch to continuous.

Aura Cleaning: Sometimes through contact with other people who may be suffering with a severe illness, or because of ones own wrong actions, ones Aura (Personal energy field) can become polluted with negative energy, which if not removed can result in some personal harm. To clean your Aura, record into the device �I clean my Aura of all negative vibrations�, then place your own hair sample in the well, or just place a finger in there, and send that vibration to yourself.

Copying: This version is fitted with an Input socket ( E ) into which you can plug in a special Pickup Sensor that you can place on pictures, writing, or on little bags of Herbs or Remedies to copy the vibrations.

In order to do this, after you have plugged in the Pickup Sensor that is supplied with the Remedy maker, place it on the material you want to copy, ( flat side down ) and press the Record button and hold it down for at least 3 seconds, but do not speak as any words you say will become mixed with the vibrations you are inputting with the Pickup Sensor.

Note: The Pickup supplied with the Combo Remedy maker is not compatible, only use the one supplied with this Remedy maker which has a green color sleeve at the plug.

Potency Range: The device can make any potency from X to LM and also unconventional potencies like the German D or "Squared". The concept of squared potencies was introduced by White Mountain to provide something even higher than LM. Where X to MM potencies might be thought of as a linear progression, squared makes possible potencies with "area".

An additional feature of the device is the automatic Lock function. Each time a remedy is made, the vibrations are immediately automatically locked into the carrier material, so that they cannot fade even if the tablets are then touched by the hand, dropped on the floor, or stored next to strong smelling substances.

This device will accept information in any presently used language. The device also incorporates a facility which makes it possible to use it in noisy environments, such as amongst a crowd of people. In these circumstances, only the voice of the user (the person who presses the record button) will be inputted.

Care of the device. The Remedy Maker is not made rugged for outdoor use, it is not waterproof and the switches can easily be damaged if the device is dropped on a hard surface, the Make switch is particulary at risk since it protrudes from the front of the case, so users are advised to take care. In addition the device could be damaged if used next to a permanent magnet, in which case it will not be repairable. When not being used it is recomended to store the device in a steel container, such as a cash box, toolbox, or inside a filing cabinet.

 

 

Made in USA